Description
Lifting and lowering by mechanical winch, single axle chassis with overrun brake, straight drawbar with ball coupling,
Telephone Enquiry: +254-724 065 904
Menu
≡
╳
Related Products
Fiber Optic Mux/Demux CWDM
Fiber Optic Mux/Demux CWDM
Fiber Optic Mux/Demux CWDM
Fiber Optic Mux/Demux CWDMApplications:
- Line Monitoring
- WDM Network
- Telecommunication
- Cellular Application
- Fiber Optical amplifier
- Access Network Performance
Hand Ratchet Cable Puller
Hand Ratchet Cable Puller
Hand Ratchet Cable Puller
Hand Ratchet Cable PullerPole Band
Pole Band
Pole Band
Pole BandA pole band is designed to suitable for use on poles of pole top diameter 150mm to 280mm. We have supplied a diameter of 155mm, 185mm, 230mm, and so on.
The pole band has a stay tension strength not exceeding 29kn. While the result will be different if a gain grid or some other device is used to transfer the shear load from the pole bolt.
Guy Clamp
Guy Clamp
Guy Clamp
Guy ClampAccording to the number of bolts, there are 3 types:1 bolt guy clamp, 2 bolt guy clamp, and 3 bolt guy clamp. 3 bolt clamp is most used due to the excellent performance.
In another installation way, the guy clamp is replaced by the wire rope clip or guy grip. Some types of guy clamps have curved ends, protecting the wire from damage.
Ratchet Cable Cutter
Ratchet Cable Cutter
Ratchet Cable Cutter
Ratchet Cable CutterMPO/MTP patch panel
MPO/MTP patch panel
MPO/MTP patch panel
MPO/MTP patch panelFeatures:
- Simple to use, convenient installation
- High density easy-plug cassette solution up to 96-fiber per 1U rack enclosure
- Improve cable manageability
- Pre-installed 12 or 24 fiber MPO adapter at the rear, choices of SC, LC adaptors at the front panel (faceplate)
- Can be pre-installed with factory-terminated & factory-tested MPO/MTP hydra assembly inside cassette module
Pole Top Bracket
Pole Top Bracket
Pole Top Bracket
Pole Top BracketPole top bracket is made to permit mounting on wood poles by two 16mm diameter bolts vertically spaced 203mm center to center. One of the bracket mounting holes is slotted to permit slight variations in mounting bolt spacing. The insulator mounting surface is at a height approximately 125mm above the top bracket mounting hole.
Wire Rope Falling Protector
Wire Rope Falling Protector
Wire Rope Falling Protector
Wire Rope Falling Protector1) Fall arrester is made of sealed aluminum housing, automatically controlled by the changed speed. It is an innovative engineering solution to arrest falls by two-disc anti-ratchet braking system.
2) A fall arrest system is a personal fall protection system that arrests a free fall and which limits the impact force on the body of the user or goods during fall arrest.
3) Store in a cool dry place, far away from chemical, water, direct sun light and sources of heat and vibration. Ensure cable section is completely retracted before storage. This is especially important when retractors are left in place outside as components of a permanent fall protection system.
Pole Top Make Off
Pole Top Make Off
Pole Top Make Off
Pole Top Make OffPole Top Pin
Pole Top Pin
Pole Top Pin
Pole Top PinThe pole top pin is made from hot new rolled steel. The steel will heat to red and punched to the designed shape. The finish of the pole top pin is hot dip galvanized which is reasonably smooth and free of burrs or other sharp projections.
Aniscom Technologies Limited was established in 2015. The company is one of the leading suppliers of telecommunication network equipment.
- Address: Repen Complex, Block A, Suite A203.
- Mobile: +254-724 065 904
- Email: info@aniscom.co.ke
Reviews
There are no reviews yet.