Telephone Enquiry: +254-724 065 904
Menu
≡
╳
Related Products
Anchor Rod
Anchor Rod
Anchor Rod
Anchor RodGuy wire anchor rod feature:
1. Breaking Load test: 62kn for 1 min
2. Hot-dip galvanized strictly according to ASTM-123
3. Uniform and reasonable packing
4. Size Accuracy 0.1mm.
5. Direct From Factory, Save 30%–50% Cost
The guy wire anchor rod with square nut is manufactured in hot-dip galvanized steel. The raw material steel is selected according to AISI-SAE 1018 or 1020. The carbon is not lower than 0.13% according to ASTM A36M. Zinc coating of 80 um, according to ASTM A-153. The head of the guy wire anchor rod will be forged in one single piece with a single eye, twin-eye, or trip eye as attached drawings.The other side rod is with 8cm to 10cm thread length according to UNC. The UNC required 10thread per inch.
The heavy-duty square nut which assembled on the guy wire anchor rod is of galvanized steel with a minimum coating of 53 um, according to class C of ASTM A153. The square nut thread is made before galvanization.
Wire Rope Grip
Wire Rope Grip
Wire Rope Grip
Wire Rope GripFiber Optic Mux/Demux CWDM
Fiber Optic Mux/Demux CWDM
Fiber Optic Mux/Demux CWDM
Fiber Optic Mux/Demux CWDMApplications:
- Line Monitoring
- WDM Network
- Telecommunication
- Cellular Application
- Fiber Optical amplifier
- Access Network Performance
Messenger Wire
Messenger Wire
Messenger Wire
Messenger WireMulti-Function Ladder
Multi-Function Ladder
Multi-Function Ladder
Multi-Function LadderThe ladder is easily foldable for convenient transportation and storage, and its easy click-lock system allows for both versatility and security. Suitable for Trade and DIY use.
• Maximum safe working load of 150kg
• Fitted with stabiliser bars
• Simple ‘click-lock’ hinge system
• Folded height 0.9m
• Stepladder height 1.65m (SWH 2.72m)
• Extension ladder height 3.38m (SWH 4.03m)
SWH is the recommended safe working height.
Guy Clamp
Guy Clamp
Guy Clamp
Guy ClampAccording to the number of bolts, there are 3 types:1 bolt guy clamp, 2 bolt guy clamp, and 3 bolt guy clamp. 3 bolt clamp is most used due to the excellent performance.
In another installation way, the guy clamp is replaced by the wire rope clip or guy grip. Some types of guy clamps have curved ends, protecting the wire from damage.
Wire Rope Falling Protector
Wire Rope Falling Protector
Wire Rope Falling Protector
Wire Rope Falling Protector1) Fall arrester is made of sealed aluminum housing, automatically controlled by the changed speed. It is an innovative engineering solution to arrest falls by two-disc anti-ratchet braking system.
2) A fall arrest system is a personal fall protection system that arrests a free fall and which limits the impact force on the body of the user or goods during fall arrest.
3) Store in a cool dry place, far away from chemical, water, direct sun light and sources of heat and vibration. Ensure cable section is completely retracted before storage. This is especially important when retractors are left in place outside as components of a permanent fall protection system.
MPO/MTP patch panel
MPO/MTP patch panel
MPO/MTP patch panel
MPO/MTP patch panelFeatures:
- Simple to use, convenient installation
- High density easy-plug cassette solution up to 96-fiber per 1U rack enclosure
- Improve cable manageability
- Pre-installed 12 or 24 fiber MPO adapter at the rear, choices of SC, LC adaptors at the front panel (faceplate)
- Can be pre-installed with factory-terminated & factory-tested MPO/MTP hydra assembly inside cassette module
Hydraulic Cable Cutter
Hydraulic Cable Cutter
Hydraulic Cable Cutter
Hydraulic Cable CutterThe cutting tools feature an advancing speed setting automatically switching from a fast advancing speed of cable cutting blades to a slower cutting speed – tools are provided with a maximum pressure valve (MPC1 manometer is available upon request to check the proper setting of the valve).
Cutting Cables Carefully
- Always read the instruction manual before using the tool
- Keep hands clear of cutting blades at all times
- Do not cut steel – for steel cutting applications contact us
- Always wear safety glasses and gloves when operating this tool
- Before starting cutting cables ensure that the latch is fully secured – partial closure may damage the cutting tool head
- Clean the tool daily after use with a clean cloth to remove any residue including dust, sand or dirt
- Do not attempt to turn the tool head if the hydraulic circuit is pressurised
Wall Mount Patch Panel
Wall Mount Patch Panel
Wall Mount Patch Panel
Wall Mount Patch PanelUpsell Products
Ratchet Cable Cutter
Ratchet Cable Cutter
Ratchet Cable Cutter
Ratchet Cable CutterPole Top Bracket
Pole Top Bracket
Pole Top Bracket
Pole Top BracketPole top bracket is made to permit mounting on wood poles by two 16mm diameter bolts vertically spaced 203mm center to center. One of the bracket mounting holes is slotted to permit slight variations in mounting bolt spacing. The insulator mounting surface is at a height approximately 125mm above the top bracket mounting hole.
Pole Climbing
Pole Climbing
Pole Climbing
Pole ClimbingHand Ratchet Cable Puller
Hand Ratchet Cable Puller
Hand Ratchet Cable Puller
Hand Ratchet Cable Puller
KSh75
Fall Protection
Fall Protection
KSh75
Fall Protection
Fall ProtectionCable Lasher with Chest
Cable Lasher with Chest
Cable Lasher with Chest
Cable Lasher with Chest
Aniscom Technologies Limited was established in 2015. The company is one of the leading suppliers of telecommunication network equipment.
- Address: Repen Complex, Block A, Suite A203.
- Mobile: +254-724 065 904
- Email: info@aniscom.co.ke
Reviews
There are no reviews yet.